Connect with an Accuflow Systems Representative to configure a custom cart solution!
Kest Technology
Kest Technology is a global provider of high-quality equipment for aseptic fluid handling. Through our sales network we support the global industry with solutions for agitation, aseptic couplings and sampling systems.
Overview of Kest Mixers
Kest Lock
Kest Lowering Device
FEATURED PRODUCTS
Mixers
Kest provides a wide array of durable, precision mixers and tank components for aseptic, reliable pharmaceuticals and food & beverage production.
The Kest mixers is a range of magnetic coupled mixers for pharma and aseptic food and beverage applications. The aseptic design is allowing the mixer to be cleaned in place and sterilized in place (CIP/SIP). The tank gets equipped with a tank plate that is welded into the tank, this eliminates any risk of contamination from the outside environment. The placement of the mixer in the bottom of the tank in combination with the bearing design enables for low volume mixing and mixing to the last drop to ensure full product recovery.
- Kest Mixer ProFlow – KMPF
- Kest Mixer Small Volume – KMS
- Kest Mixer – KM
- Kest Mixer ATEX – KM ATEX
- Kest Mixer Rapid Motion – RM
- Kest Mixer Rapid Motion ATEX – RM ATEX
FEATURED PRODUCTS
Couplings
The Kest-Lock contains one split ring, basic or snap type and one weld-in flange. You place the gasket in the weld-in part and connect your TriClamp device or tube, the snap version will help you to hold the TriClamp device in place while you are tightening the locking device. The Kest-Lock range contains of several different weld-in parts. Those can also be customized to fit your needs. We can deliver different materials and do custom designs.
- Kest-Lock Basic – KLB
- Kest-Lock Snap – KLS
- Kest Blind Cap with Knob – KLBF
FEATURED PRODUCTS
Sampling Unit
The Kest Sampling Unit has become a very popular sampling solution, it combines sampling at controlled conditions with cost efficiency and ease of use. The operator simply penetrates a silicon membrane with a pencil point needle to collect a sample. When removing the needle, the membrane self-seals and can hold a pressure up to 7 bar. The sample can now be extracted from the container to be analyzed. Each sample port can facilitate 8 samples per batch. The system is designed to be fitted to a standard TC- ferrule, ISO 2852. The sample port is easily attached to a tank or pipe with a standard TriClamp connection like Kest-Lock.
The Kest-Lock range contains of several different weld-in parts. Those can also be customized to fit your needs. We can deliver different materials and do custom designs.
